The pre-amp string is in and wired to the main power supply turret board. Also the bulk of the
back panel is wired up, and the first filter caps are in. Next we will string the power tubes and
then run the main ground buss on the front panel.

Ground buss & pots are in, the power supply is wired, and screen resistors & grid stoppers are in place.
 

 Top view

 So now I have to decide if I wire in the turret board and then mount the trannies,
or mount the trannies and then wire the boards in.
Either way I have to prep the boards so I'll do that first.
Should have pics of the turrets tomorrow!

Stay tuned...